STIRLING Scroll Driveway Gates ST10ZP vs STIRLING Scroll Driveway Gates ST22ZP
We compare the STIRLING Scroll Driveway Gates ST10ZP and the STIRLING Scroll Driveway Gates ST22ZP across every dimension that matters - our scores, the key specs, and how each performs on the things you will actually notice day to day.
At a glance
| STIRLING Scroll Driveway Gates ST10ZP | STIRLING Scroll Driveway Gates ST22ZP | |
|---|---|---|
| Our score | 8.7/10 | 8.3/10 |
| Best for | A secure, good-looking entrance to your driveway or garden | A secure, good-looking entrance to your driveway or garden |
| Not ideal for | Anyone wanting a ready-automated gate out of the box | Anyone wanting a ready-automated gate out of the box |
| Brand | STIRLING | STIRLING |
Specifications compared
| STIRLING Scroll Driveway Gates ST10ZP | STIRLING Scroll Driveway Gates ST22ZP | |
|---|---|---|
| Material | Wrought iron Listed | Galvanised wrought iron |
| Opening gap | 2134mm (7ft) Listed | 3353mm (11ft) |
| Height | 914mm Listed | 914mm |
What It Is and Who It's For
STIRLING Scroll Driveway Gates ST10ZP
The STIRLING is a wrought iron driveway gate designed to fit a 2134 mm (7 ft) opening gap, with a 914 mm high gate section. It is aimed at homeowners who need a metal gate to match a specific clearance, and it suits driveways where a single section height of 914 mm works. Because the product type is wrought iron and the key dimensions are clearly stated, it is straightforward to compare against existing gate openings.
STIRLING Scroll Driveway Gates ST22ZP
This driveway gate is a galvanised wrought-iron driveway gate built for an opening gap of 3353mm (11ft), with a stated height of 914mm. It is intended for UK homeowners or property managers who want a traditional metal gate style and have a drive where those opening dimensions match the property entrance. Because the opening width and height are fixed, it is not suitable for narrower drives or locations where the available clearance differs from the stated fit. For the best outcome, measure the entrance opening first and then align the installation plan to the gate's specified dimensions.
Build, Material and Durability
STIRLING Scroll Driveway Gates ST10ZP
Built as a wrought iron driveway gate, the driveway gate is made to fit a 2,134 mm (7 ft) opening gap, and provides a 914 mm high gate section. It is constructed from wrought iron, a material known for strength and a rigid frame, which helps maintain shape against everyday knocks. Scroll-style detailing adds structure across the panel rather than relying on thin bars, although it can create additional edges that may require ongoing maintenance. Durability depends on finishes.
STIRLING Scroll Driveway Gates ST22ZP
Galvanised wrought iron is at the centre of the STIRLING build, and it directly shapes both the appearance and outdoor durability. The gate uses wrought iron for its main body, with a galvanised finish intended to help resist rust as weather changes, including rain, damp air and coastal conditions. It is built for a driveway opening with a 3353mm (11ft) gap and a 914mm high frame, so panel size influences how the gate responds to flex and wind pressure. Durability is broadly suitable for outdoor use, but protection can be reduced where the galvanised coating is chipped or damaged.
Installation and Fitting
STIRLING Scroll Driveway Gates ST10ZP
After considering how the wrought iron construction and scroll detailing affect long-term shape, attention shifts to installation and fitting for the STIRLING. This is a physical driveway gate for a 2134mm (7ft) opening gap, with a listed height of 914mm. Fitters typically begin by checking that the opening measurement matches the stated gap, as misalignment can lead to uneven gaps. The next step is to position the posts and hinges level, then lift the gate into place and verify a smooth swing. Final adjustments centre on stops and alignment, followed by an inspection of all fixings.
STIRLING Scroll Driveway Gates ST22ZP
Once the driveway opening is measured and marked, the fitting process for the driveway gate begins by confirming the required width and height. The gate is made to suit a 3353mm (11ft) gap and a 914mm high frame. The installer then checks the frame alignment at ground level, since uneven surfaces can cause binding. Next, the hinges and gate leaf are positioned, with temporary braces used to hold spacing while fasteners are tightened in stages. If the opening is slightly off, adjustments to the frame may be needed. Because galvanised wrought iron can be heavy, teamwork can make the handling more practical.
Security and Everyday Use
STIRLING Scroll Driveway Gates ST10ZP
For everyday security, the driveway gate uses wrought iron construction, and that material typically holds its shape well compared with lighter metals, though performance depends on how the gate is installed and secured. With an opening gap of 2134 mm (7 ft) and a height of 914 mm, it can help reduce easy access from the roadside or the driveway edge. Daily use is mainly about reliable opening and closing, with attention to latch alignment, hinge condition and regular cleaning. If the fitting is off or any hardware loosens, security and smooth operation can be affected.
STIRLING Scroll Driveway Gates ST22ZP
With the frame now aligned and the leaves positioned, focus turns to day-to-day use of these The STIRLING and how they support deterrence of unwanted access. The galvanised wrought iron, including the scrollwork, forms a visible boundary across a 3353mm (11ft) opening, which can discourage casual entry. Day-to-day operation depends on the gate opening and closing smoothly and the latch engaging securely, since any sticking can allow gaps.
Who Is This For?
STIRLING Scroll Driveway Gates ST10ZP
This gate is a good match for property entrances where a wrought iron look with scroll styling is wanted. The STIRLING Scroll Driveway Gates is designed for a 2134mm (7ft) gap, as the opening size is 2134mm, and it is also suitable for buyers needing a 914mm high wrought iron metal gate. It focuses on these stated dimensions, so different opening widths or heights would require a different gate size.
STIRLING Scroll Driveway Gates ST22ZP
Who this is for depends mainly on the size of the gap and the height needed at the property. These Stirling Scroll driveway gates are made to fit a 3353mm (11ft) opening and stand 914mm high, with wrought iron construction and a scroll design. They suit driveways and entrances where a tall, classic look is important rather than a fully custom size. Homeowners and installers can use them when the opening matches the stated dimensions, because fitting work is then more straightforward. Buyers who need different gap widths or heights will need other options, as those measurements are fixed.
STIRLING Scroll Driveway Gates ST10ZP: pros
- Wrought iron construction
- Scroll / bow-top styling
- 2134mm opening opening
- Secure, attractive entrance
- Can be automated later with an opener kit
Cons
- Posts must be set (usually concreted) and the gate hung level
- Heavy to handle, especially double or metal gates
- Not automated out of the box - add an opener separately
STIRLING Scroll Driveway Gates ST22ZP: pros
- Wrought iron construction
- Scroll / bow-top styling
- 3353mm opening opening
- Secure, attractive entrance
- Can be automated later with an opener kit
Cons
- Posts must be set (usually concreted) and the gate hung level
- Heavy to handle, especially double or metal gates
- Not automated out of the box - add an opener separately
Our verdict
Our pick is the STIRLING Scroll Driveway Gates ST10ZP (our score 8.7/10) - A solid driveway gate (wrought iron) for security and kerb appeal. The STIRLING Scroll Driveway Gates ST22ZP is still worth it if it is cheaper when you check, or if it better matches your specific needs.