Regent Scroll Metal Driveway Gates RDZP10 vs Classic Scroll Tall Bow Top Gate CBZP40
We compare the Regent Scroll Metal Driveway Gates RDZP10 and the Classic Scroll Tall Bow Top Gate CBZP40 across every dimension that matters - our scores, the key specs, and how each performs on the things you will actually notice day to day.
At a glance
| Regent Scroll Metal Driveway Gates RDZP10 | Classic Scroll Tall Bow Top Gate CBZP40 | |
|---|---|---|
| Our score | 8.1/10 | 9.2/10 |
| Best for | A secure, good-looking entrance to your driveway or garden | A secure, good-looking entrance to your driveway or garden |
| Not ideal for | Anyone wanting a ready-automated gate out of the box | Anyone wanting a ready-automated gate out of the box |
| Brand | Regent | Classic Scroll |
Specifications compared
| Regent Scroll Metal Driveway Gates RDZP10 | Classic Scroll Tall Bow Top Gate CBZP40 | |
|---|---|---|
| Height | 914mm | 1753mm high |
| Material | Galvanised wrought iron | Galvanised wrought iron |
What It Is and Who It's For
Regent Scroll Metal Driveway Gates RDZP10
The driveway gate is a swing driveway gate made from galvanised wrought iron. It is sized for a driveway opening with a 2134mm (7ft) gap and a frame height of 914mm, with a single gate leaf for the stated opening width. It is intended for people who need a driveway entrance gate that matches these dimensions, particularly when a traditional scroll style is required. As a swing gate, installation needs planning around the driveway and approach area to allow the gate to open fully without obstruction. It suits homeowners, landlords, and small commercial sites with basic access control needs, but the opening width should be confirmed before ordering because the size is fixed at 2134mm.
Classic Scroll Tall Bow Top Gate CBZP40
This driveway gate is a galvanised wrought iron, bow-top style swing driveway gate designed for a 762 mm opening (762 mm gap), with a height of 1753 mm. It is made for homeowners who need a narrow-but-tall entrance span, where the gate must suit a defined gap yet still provide a prominent vertical look. It suits anyone who prefers traditional wrought iron styling, given the bow-top profile and swing design. It may not suit wider openings, and swing gates need clearance for opening space. It is appropriate for driveway access planning where the opening width and swing clearance are already accounted for.
Build, Material and Durability
Regent Scroll Metal Driveway Gates RDZP10
The Regent are physical swing driveway gates made using galvanised wrought iron. The frame is stated as 914mm high, with a 2134mm (7ft) opening gap. The galvanised finish is intended to resist rust better than untreated steel, while wrought iron supports a rigid, scroll-styled structure. The metal construction is suited to everyday drive access because metal frames typically keep shape under normal use. Durability depends on ongoing care, since metal can still be affected by scratches, chipped coating, and coastal salt-heavy weather, and it is especially important after harsh winter conditions.
Classic Scroll Tall Bow Top Gate CBZP40
Constructed as a galvanised wrought iron swing driveway gate, the Classic Scroll is designed for outdoor exposure while keeping a traditional look. Its bow-top profile supports a tall, rigid form. The frame and scrollwork are made from wrought iron, prioritising strength over lightweight design. A galvanised finish is intended to resist corrosion, although coating wear can still occur if the surface is scratched or chipped. It is sized as a 762mm gap by 1753mm high, and that height increases wind load on the gate. Durability depends on surface care, but the material selection supports long-term use.
Installation and Fitting
Regent Scroll Metal Driveway Gates RDZP10
Proper installation helps these The driveway gate scroll-style metal driveway gates work smoothly and stay aligned over time. The process starts with checking the gate opening and ground conditions. For a 2134mm (7ft) gap, the frame must sit squarely, and the 914mm high leaves should have even clearance at both sides. Installers then mark hinge and latch positions, fit the gates to sturdy posts or walls, and use level and measuring tools throughout. If the ground is uneven or soft, shifting can occur, so shimming may be needed. After hanging, they should test opening and closing by hand, then recheck alignment.
Classic Scroll Tall Bow Top Gate CBZP40
Proper installation matters for a tall swing driveway gate fitted in a 762mm opening. Start by measuring the site and confirming the opening width, then check that the driveway surface is level. Position the posts so the gate can swing freely without scraping, offer the unit up to verify clearances, and mark hinge and mounting points accurately. Drill and fix carefully, then re-check alignment, as any slight unevenness may require re-leveling the posts. Once fitted, test the swing gently and tighten all fixings evenly.
Security and Everyday Use
Regent Scroll Metal Driveway Gates RDZP10
Daily security starts with how these This driveway gate scroll metal driveway gates are used and maintained, not just their design. In everyday use, the 2134mm (7ft) gap swing gate, standing 914mm high, relies on consistent closing, so checking it is fully latched each time helps keep it secure. The galvanised wrought iron finish should resist corrosion, but routine cleaning is still required, particularly after wet weather or soil build-up. Locks, hinges, and gate alignment should be inspected regularly, because looseness can create gaps that reduce security. Minor adjustments and lubrication can keep the swing action smooth, but they require ongoing attention.
Classic Scroll Tall Bow Top Gate CBZP40
Security and Everyday Use for the driveway gate Metal Garden Gate (CBZP40) depends on correct day-to-day handling of a tall metal swing gate. A 762mm gap and 1753mm height mean reliable everyday use relies on the gate being aligned properly and operated gently. With routine use, closing should be smooth each time, with the latching engaging without forcing. Wrought iron provides a substantial physical presence, but secure operation still depends on the fit around the posts and the condition and alignment of the hinges, since gaps can affect how securely the gate holds. For everyday safety, avoid slamming, keep the access path clear, and check for loosened fasteners.
Who Is This For?
Regent Scroll Metal Driveway Gates RDZP10
This gate is suitable for people who want a traditional wrought-iron swing gate for a driveway, with an opening width of 2134mm (7ft) and a gate height of 914mm. It suits homeowners who prefer a galvanised metal gate designed for outdoor use, and who are fitting it to an existing gap that matches those dimensions. The scroll design targets buyers looking for a decorative, garden-style finish rather than a flat panel. It may be less suitable if the required opening width or gate height does not match 2134mm and 914mm, because those dimensions are not adjustable.
Classic Scroll Tall Bow Top Gate CBZP40
This driveway entrance gate is most suitable for homeowners, landlords, or small property managers who want a tall wrought-iron swing gate with a stated 762mm opening gap. The Classic Scroll model, sized 1753mm high with the 762mm gap, suits properties that need a clearer passage width rather than a narrower entry. It is also intended for outdoor use, with a galvanised metal finish included to help resist corrosion. Installation requires planning around swing clearance, as the available space can limit where the gate can be positioned.
Regent Scroll Metal Driveway Gates RDZP10: pros
- Wrought iron construction
- Scroll / bow-top styling
- 2134mm opening opening
- Secure, attractive entrance
- Can be automated later with an opener kit
Cons
- Posts must be set (usually concreted) and the gate hung level
- Heavy to handle, especially double or metal gates
- Not automated out of the box - add an opener separately
Classic Scroll Tall Bow Top Gate CBZP40: pros
- Wrought iron construction
- Scroll / bow-top styling
- 762mm opening opening
- Secure, attractive entrance
- Can be automated later with an opener kit
Cons
- Posts must be set (usually concreted) and the gate hung level
- Heavy to handle, especially double or metal gates
- Not automated out of the box - add an opener separately
Our verdict
Our pick is the Classic Scroll Tall Bow Top Gate CBZP40 (our score 9.2/10) - A solid driveway gate (wrought iron) for security and kerb appeal. The Regent Scroll Metal Driveway Gates RDZP10 is still worth it if it is cheaper when you check, or if it better matches your specific needs.