Regent Scroll Metal Driveway Gates RDZP10 vs Regent Scroll Tall Bow Top RBZP40
We compare the Regent Scroll Metal Driveway Gates RDZP10 and the Regent Scroll Tall Bow Top RBZP40 across every dimension that matters - our scores, the key specs, and how each performs on the things you will actually notice day to day.
At a glance
| Regent Scroll Metal Driveway Gates RDZP10 | Regent Scroll Tall Bow Top RBZP40 | |
|---|---|---|
| Our score | 8.1/10 | 8.4/10 |
| Best for | A secure, good-looking entrance to your driveway or garden | A secure, good-looking entrance to your driveway or garden |
| Not ideal for | Anyone wanting a ready-automated gate out of the box | Anyone wanting a ready-automated gate out of the box |
| Brand | Regent | Regent |
What It Is and Who It's For
Regent Scroll Metal Driveway Gates RDZP10
The driveway gate is a swing driveway gate made from galvanised wrought iron. It is sized for a driveway opening with a 2134mm (7ft) gap and a frame height of 914mm, with a single gate leaf for the stated opening width. It is intended for people who need a driveway entrance gate that matches these dimensions, particularly when a traditional scroll style is required. As a swing gate, installation needs planning around the driveway and approach area to allow the gate to open fully without obstruction. It suits homeowners, landlords, and small commercial sites with basic access control needs, but the opening width should be confirmed before ordering because the size is fixed at 2134mm.
Regent Scroll Tall Bow Top RBZP40
This driveway gate is a driveway swing gate made from galvanised wrought iron. It is designed for a gate opening gap of 762mm and a height of 1753mm, with a scroll and bow-top decorative profile. It is suited to buyers who want a classic metal gate for an exterior driveway entrance where not stated framing or hardware compatibility is confirmed. The galvanised finish indicates outdoor durability, but performance still depends on site conditions and correct installation. Measure the available opening gap to confirm it matches 762mm before ordering, as narrower and mid-range drive entrances are the most likely fit.
Build, Material and Durability
Regent Scroll Metal Driveway Gates RDZP10
The Regent are physical swing driveway gates made using galvanised wrought iron. The frame is stated as 914mm high, with a 2134mm (7ft) opening gap. The galvanised finish is intended to resist rust better than untreated steel, while wrought iron supports a rigid, scroll-styled structure. The metal construction is suited to everyday drive access because metal frames typically keep shape under normal use. Durability depends on ongoing care, since metal can still be affected by scratches, chipped coating, and coastal salt-heavy weather, and it is especially important after harsh winter conditions.
Regent Scroll Tall Bow Top RBZP40
The Regent is a galvanised wrought iron swing gate designed for outdoor installation and to withstand normal driveway weather exposure. The gate body is wrought iron, with galvanisation intended to resist surface corrosion outdoors. It is sized for a 762mm opening gap and measures 1753mm high, making it suitable for taller boundary lines. The scroll and bow-top styling is formed in the metalwork, creating structure rather than fabric panels. Durability is best considered under regular rain and light weather.
Installation and Fitting
Regent Scroll Metal Driveway Gates RDZP10
Proper installation helps these The driveway gate scroll-style metal driveway gates work smoothly and stay aligned over time. The process starts with checking the gate opening and ground conditions. For a 2134mm (7ft) gap, the frame must sit squarely, and the 914mm high leaves should have even clearance at both sides. Installers then mark hinge and latch positions, fit the gates to sturdy posts or walls, and use level and measuring tools throughout. If the ground is uneven or soft, shifting can occur, so shimming may be needed. After hanging, they should test opening and closing by hand, then recheck alignment.
Regent Scroll Tall Bow Top RBZP40
Once the site is ready, installation should start by checking the gate opening to match the stated 762mm gap, and by confirming the planned position allows clearance when the swing moves. The installer should place the driveway gate Top metal garden gate into position with a 762mm opening and a 1753mm high frame, then verify it sits squarely. Hinges and fixing points should be aligned to the chosen location, because misalignment can lead to uneven closing gaps. After initial fastening, the gate should be opened and closed several times to confirm smooth movement and stable alignment, with any required repositioning carried out before final tightening.
Security and Everyday Use
Regent Scroll Metal Driveway Gates RDZP10
Daily security starts with how these This driveway gate scroll metal driveway gates are used and maintained, not just their design. In everyday use, the 2134mm (7ft) gap swing gate, standing 914mm high, relies on consistent closing, so checking it is fully latched each time helps keep it secure. The galvanised wrought iron finish should resist corrosion, but routine cleaning is still required, particularly after wet weather or soil build-up. Locks, hinges, and gate alignment should be inspected regularly, because looseness can create gaps that reduce security. Minor adjustments and lubrication can keep the swing action smooth, but they require ongoing attention.
Regent Scroll Tall Bow Top RBZP40
Proper installation helps the gate move evenly, which influences how secure it feels during everyday use. With a 762mm opening gap and 1753mm height, the Regent swing gate forms a clear physical barrier while still allowing normal passage. Once fitted, it should open smoothly without rubbing, because uneven movement can leave gaps when closed. Everyday checks can include confirming the gate aligns within its frame, testing latch engagement, and inspecting metal wear on high-contact points. Galvanised wrought iron is intended to resist rust for long service, but if the coating is scratched, corrosion risk increases over time and the area needs monitoring.
Who Is This For?
Regent Scroll Metal Driveway Gates RDZP10
This gate is suitable for people who want a traditional wrought-iron swing gate for a driveway, with an opening width of 2134mm (7ft) and a gate height of 914mm. It suits homeowners who prefer a galvanised metal gate designed for outdoor use, and who are fitting it to an existing gap that matches those dimensions. The scroll design targets buyers looking for a decorative, garden-style finish rather than a flat panel. It may be less suitable if the required opening width or gate height does not match 2134mm and 914mm, because those dimensions are not adjustable.
Regent Scroll Tall Bow Top RBZP40
Who this is for depends largely on the space and the kind of entryway it needs to cover. The driveway gate is a driveway gate designed as a swing gate with a 762 mm opening gap and a 1753 mm overall height. It is made in a galvanised wrought iron style. This suits people who need a wider-than-average passage for vehicles while keeping a formal look. It also fits properties that can accommodate the clearance required for a swing gate to open. Buyers should check the mounting points and available width before choosing, because the stated dimensions may not match every driveway layout.
Regent Scroll Metal Driveway Gates RDZP10: pros
- Wrought iron construction
- Scroll / bow-top styling
- 2134mm opening opening
- Secure, attractive entrance
- Can be automated later with an opener kit
Cons
- Posts must be set (usually concreted) and the gate hung level
- Heavy to handle, especially double or metal gates
- Not automated out of the box - add an opener separately
Regent Scroll Tall Bow Top RBZP40: pros
- Wrought iron construction
- Scroll / bow-top styling
- 762mm opening opening
- Secure, attractive entrance
- Can be automated later with an opener kit
Cons
- Posts must be set (usually concreted) and the gate hung level
- Heavy to handle, especially double or metal gates
- Not automated out of the box - add an opener separately
Our verdict
Our pick is the Regent Scroll Tall Bow Top RBZP40 (our score 8.4/10) - A solid driveway gate (wrought iron) for security and kerb appeal. The Regent Scroll Metal Driveway Gates RDZP10 is still worth it if it is cheaper when you check, or if it better matches your specific needs.